Your One-Stop Shop for Silicone Wire and Tape. For Military, Space, Industrial and Manufacturing Applications.
Silicone Wire and Tape
Silicone Wire and Tape
Silicone Wire and Tape
 
 

Versiwrap

 
Versiwrap Silicone Rubber TapeRowe's Versiwrap Silicone Rubber Tape is an improved wrapping tape extruded of high performance silicone rubber suitable wherever a tough, permanently resilient, void-free insulation is required.  On TGL tape (Triangular Guide Line), the colored guide line facilitates wrapping and cuts taping time. The triangular shape assures a smooth, uniform finished wrap over difficult shapes, such as coils, splices, bus bars and cable harnesses.  Rowe's Silicone Rubber Tape is self-adhering and self-fusing, curing in 24 hours at room temperature.  Faster curing and a harder finish can be accomplished through the application of heat after wrapping.  Temperature range is -60°C t0 200°C for continuous use; -65°C to 260°C for intermittent use.
 
USES

The strength and elasticity of Rowe's Silicone Rubber Tape makes it ideal for automatic wrapping processes, such as for coils, where it protects the coils from the effects of vibration and shock and will not crack or separate with expansion or contraction stresses.  The low dielectric losses and high insulation resistance of Rowe's Silicone Rubber Tape will not limit performance of a coil over a very wide temperature range.  The high thermal conductivity allows generated heat to dissipate rapidly resulting in a lower temperature rise and an increase of available power for a given load.  The use of Rowe's Silicone Rubber Tape makes it possible to easily and quickly reclaim old motors by over-wrapping deteriorated insulation.  By the same process extra protection may be added to open frame motors or other equipment in difficult or contaminated locations.  May be used in many Class A and Class B applications.  High quality Class H insulation systems can be made using Rowe's Silicone Rubber Tape in combination with SR-200 Silicone Rubber Tubing.

For optimum shelf life, silicone rubber tape should be stored in a cool, dry area.

 
SPECIFICATIONS

Rowe's Silicone Rubber Tape meets or exceeds the requirements of MIL CID-A-A-59163, Type I, Rectangular; and Type II, Triangular Guide Line.
 
COLORS

Standard Colors: Red, Gray, Black (TGL)
Standard Color:  Red, Black (Rectangular)
Other colors subject to factory quotation upon request.
 
PACKAGING
1" x .020" thru TGL
1 1/2" x .080" 12 Yard Roll
3/4", 1", 1 1/2" Rectangular
.012" .015" .020" Wall 12 Yard Roll

Other sizes and roll lengths can be supplied, subject to factory quotation upon request.
 
 

CHARACTERISTICS OF SILICONE RUBBER TAPE

PROPERTY TEST METHOD PERFORMANCE
Operating Temperature Range:
 Continuous
 Intermittent
   
 -60°C to 200°C
 -65°C to 260°C
Specific Gravity ASTM D792  1.2
Hardness, Durometer, Shore A
 Room-cured -- 24 Hours
 Cured at 300°F -- 24 Hours
 Cured at 480°F -- 24 Hours
ASTM D2148  
 50
 70
 75
Tensile Strength, psi, minimum ASTM D119  700
Elongation, %, minimum ASTM D119  300
Tear Strength, ppi, minimum ASTM D624, Die B  
Bond Strength, pounds, minimum MIL CID-A-A-59163  2 (1" width)
Adhesion, inches unwind, maximum ASTM D2148  3
Cold Brittle Point, °C, maximum ASTM D746  -65
Water Absorption, % max, by weight MIL CID-A-A-59163  3
Dielectric Strength, volts/mil, minimum
 Thickness 0.020 inch
 Thickness 0.030 inch
 Thickness 0.040 inch
 Thickness 0.050 inch
 Thickness 0.060 inch
 Thickness 0.080 inch
MIL CID-A-A-59163  
 400
 400
 300
 275
 250
 200
Dielectric Constant, 1 KHz ASTM D150  2.95
Dissipation Factor, 1 KHz ASTM D150  <0.0004
Volume Resistivity, ohms/cm, minimum MIL CID-A-A-59163  3x10
Above values are typical performance data for FLEXITE Silicone Rubber TGL Tape and are not intended to be used as design data.
 
 
WIDTH THICKNESS GUIDELINE
COLOR
AVERAGE
ROLL LENGTH
NOMINAL WEIGHT
PER ROLL
inch mm inch mm yards meters pounds kilogram

TRIANGULAR

*1.0 25.4 .020 .0508 Blue 12 10.97 .279 .1266
*1.0 25.4 .030 .0762 White 12 10.97 .375 .1701
*1.0 25.4 .040 1.016 Green 12 10.97 .469 .2127
1.25 31.75 .040 1.016 Green 12 10.97 .584 .2649
1.25 31.75 .050 1.270 Yellow 12 10.97 .701 .3180
1.5 38.1 .060 1.524 Blue 12 10.97 .984 .4463
1.5 38.1 .080 20.32 White 12 10.97 1.265 .5738
2.0 50.8 0.020 0.508 Blue 12 10.97 0.532 0.241
2.0 50.8 0.030 0.762 White 12 10.97 0.628 0.285

RECTANGULAR

.750 19.5 .012 .305  n/a 12 10.97 .163 .0739
.750 19.5 .015 .381  n/a 12 10.97 .205 .0930
.750 19.5 .020 .508  n/a 12 10.97 .277 .1256
*1.0 25.4 .012 .305  n/a 12 10.97 .215 .0975
*1.0 25.4 .015 .381  n/a 12 10.97 .277 .1256
*1.0 25.4 .020 .508  n/a 12 10.97 .368 .1669
1.5 38.1 .012 .305  n/a 12 10.97 .330 .1497
1.5 38.1 .015 .381   n/a 12 10.97 .415 .1882
1.5 38.1 .020 .508  n/a 12 10.97 .552 .2504

*Standard Sizes

 
 
Versiwrap Silicone Rubber Tape



Versiwrap Silicone Rubber Tape













Versiwrap Silicone Rubber Tape


Copyright 2005 D&B Industrial Group
This site created by InterNetworking Technologies
Contact the Webmaster Scott Livingood

 

Visit our other sites:
Dielectric Insulation (Spiral Wound Tubing) http://www.dielectricinsulation.com - PrimeWeld (Thermoplastic Welding Rods) http://www.primeweld.net
Thermoplastic Processes (Thermoplastic Pipe, Tubing, Rods) http://www.excelon.com - ER Tape (Emergency Repair Tape) http://www.ertape.com
DB Industrial Group (Corporate Website) http://www.dbindustrialgroup.com