|
For every equipment,
appliance and fixture design, there is one or more Flexlead
constructions that will efficiently and economically provide the
required performance in-use. Below are two listings: One,
numerically by the applicable style number or alphabetic
identification system used by the controlling agency; Two, wherein
materials are compiled relative to end-use, temperature and
voltage parameters. Flexlead styles will be added as
applicable. Please contact us for the most current approval
status. |
APPLIANCE
WIRING CONDUCTORS
In most instances, appliance
wiring conductors are constructed of solid or stranded copper,
nickel, or special alloys. When copper is used, it
is usually required to have a coating of tin, silver, or
nickel, either cladded or plated. For 150C rated constructions,
individual wires within the conductor normally shall not
be smaller than #24 AWG, except solid conductors and some
business machine wires which are defined by the applicable
style requirements. 200C wires require strands no
smaller than #24 AWG. Unless special requirements
exist, Rowe Industries, Inc. supplies tinned copper conductor
in labeled constructions.
FIXTURE & EQUIPMENT
WIRING CONDUCTORS
Fixtures and equipment wiring
conductors are constructed of either solid or stranded
nickel or copper. When copper is used, it shall
have a coating of tin, silver, or nickel, with individual
wires within stranded conductors to be #26 to #36 AWG
inclusive. Unless special requirements exist, Rowe
Industries supplies tinned copper conductor in labeled
construction.
JACKETING
When required, Rowe Industries
supplies a fiberglass overbraid with a heat, flame and
moisture resistant saturant in accordance with commercial
and military specifications.
SPECIAL CONSIDERATIONS
All constructions described
in this brochure are available with labels indicating
their listing as recognized wiring materials by Underwriters'
Laboratories and Canadian Standards Association and as
such incorporate all necessary markers, jackets, stripes,
etc., to conform to applicable style requirements.
Where these labels are not required, Rowe Industries can
supply these configurations or similar cables in custom
materials designed to meet your exacting requirements.
NOTES
Technical requirements and
design technology are constantly changing to meet the
needs of industry both today and in the future.
If your required style is not listed, or design requirements
dictate specially manufactured items, please call us and
let us assist you in determining the best construction
for your application, or fill out our custom quote form.
Chances are you may be pleasantly surprised to discover
that we have a material ideally suited to your needs.
Since Approval Agencies' requirements are subject to periodic
review and revision, constructions and data given herein
are for information only. Contact factory for current
specifications. Underwriter's File #E-61355 CSA
File #LL103756. |
